Honeywell MAXPRO NVR Hybrid XE - Overview

CONFIGURING MAXPRO NVR
Overview
110 MAXPRO NVR 5.0 Installation and Configuration Guide
6
Overview
Configuring MAXPRO NVR involves setting up the system to perform video surveillance and IP
recording operations. This is the most important phase for commissioning MAXPRO NVR
system as it involves setting up the MAXPRO NVR IP address, organizing devices, users, and
roles. The MAXPRO NVR configuration task is performed only by the user having the NVR
Administrator role. This is the initial task performed after the setting up the MAXPRO NVR
system.
Caution: Logon as Administrator only when an administrative activity need to be
performed, Operator is preferred for all other activity.
Note: For a user having the Operator role, the contents in this chapter serve as a
reference.
MAXPRO NVR configuration involves the following tasks:
• Configuring the Honeywell cameras with MAXPRO NVR Wizard.
• Configuring the System settings
• Configuring the Disk settings
• Configuring the Cameras
• Adding IP Cameras / Encoders
• Manually adding cameras
• Discovering and Adding Third Party PSIA, ONVIF and AXIS Cameras
• Discovering and Adding Multi-channel Encoders
• Adding FLIR Camera
• Adding RTSP Cameras/Encoders
• Adding Streams
• Configuring the Input and Output for an IP camera
• Configuring 360/180 Cameras
• Managing Analog Cameras
• Configuring Analog Cameras
• Configuring the Input and Output for an Analog camera
• Server VMD (SMART VMD)
• Updating the Cameras
• Deleting the Cameras
• Configuring the Schedules
• Configuring the Sequences
• Performing User administration