Honeywell MAXPRO NVR Hybrid XE - Before You Begin; Firewall Settings; Configuring the Honeywell Cameras with MAXPRO NVR Wizard

. . . . .
CONFIGURING MAXPRO NVR
Firewall Settings
MAXPRO NVR 5.0 Installation and Configuration Guide 111
Before you Begin
• Ensure that you have completed MAXPRO NVR server and client hardware setup
and software installation.
Firewall Settings
Caution: The Firewall settings are pre-configured for boxed solutions – MAXPRO
NVR XE, SE, PE and MAXPRO NVR Hybrid XE, SE, PE. For MAXPRO NVR
Software-Only solution, the Firewall settings are automatically configured
during the installation process.
Configuring the Honeywell cameras with
MAXPRO NVR Wizard
MAXPRO NVR Wizard is an easy three-step* procedure to live video for Honeywell devices.
This wizard automatically starts each time you power on the MAXPRO NVR system.
(* 3 clicks with default settings and in a local area network for specific models)
1. Step 1 - The CONFIGURATION page (Figure 6-1) appears.