CONFIGURING MAXPRO NVR
Performing User Administration
178 MAXPRO NVR 5.0 Installation and Configuration Guide
6
To u p d at e a s e q ue n ce
1. Click the Configurator tab. The System page displays by default.
2. Click the Sequence tab to navigate to the Sequence page.
3. Select the check box corresponding to the sequence you want to update.
4. You can change the sequence name, dwell time and sequence of the cameras.
5. Click Save.
Deleting a Sequence
1. Click the Configurator tab. The System page displays by default.
2. Click the Sequence tab to navigate to the Sequence page.
3. Select the check box corresponding to the sequence you want to delete.
4. Click Delete. A confirmation message appears on the top of the display area.
5. Click Yes.
Performing User Administration
A user in MAXPRO NVR is responsible for performing various operations like viewing video,
reporting alarms, and other video surveillance tasks. You can create two types of users in
MAXPRO NVR: System Local User and Windows User.
Caution: Logon as Administrator only when an administrative activity need to be
performed, Operator is preferred for all other activity.
System Local User
A System local user can access only MAXPRO NVR Client. This user may not have access to a
client workstation.
Windows User
A Windows user can access a client workstation and also MAXPRO NVR Client.
Users and Roles
Roles are provided to a user. These roles comprise a set of privileges. When a user is
associated to a role, the privileges that are available for the role are also assigned to the user.
The various roles available in MAXPRO NVR are as follows:
• NVR Administrator
• Operator
•Supervisor
• Internet Operator
• Live View Operator
For MAXPRO NVR Software-Only Solution
To Next Page
Loading...
