MAXPRO NVR 5.0 Installation and Configuration Guide 217
9
MAXPRO NVR Web Client
In this chapter...
Introducing Web Client
The MAXPRO NVR Web Client allows you to remotely access the MAXPRO NVR server and
perform video surveillance using a web browser such as Internet Explorer. It gives you the
flexibility to view live video and perform the basic video surveillance functions remotely over
the web.
MAXPRO NVR Web client is available with MAXPRO NVR 4.0. By default MAXPRO NVR installs
the Web client and MAXPRO Web Configurator along with the NVR 4.0 installation. You can
use the web client once you have installed the NVR 4.0.
MAXPRO NVR Web Client functions involve the following tasks:
• Viewing the live video
• Viewing Recorded Video (Playback)
• Taking Snapshot
•Viewing Presets
Limitation with Privacy Protection Settings
• Anonymization is not supported in Web. If user is tries to see Anonymized video and
also camera Anonymized option is enabled then an error message “Trying to access
Anonymized Stream” is displayed.
• When an Operator (non-admin) logs into the Web Client and tries to view playback
for any video then an error message “Four Eye authentication Privilege Failure” is
displayed.
Installing Web Client
By default MAXPRO NVR 4.0 installs the Web Client component on your machine. It also
installs the MaxproWEBConfigurator utility to change or update the system and server
configuration. If you want to access the MAXPRO NVR Server using Web Client remotely
through a supported web browser then you should install Silverlight on the remote machine.
Section See page...
Introducing Web Client 217
Installing Web Client 217
Setting the MAXPRO Web Configurator 218
Creating Self Signed Certificate 224
Installing the Certificate 228
To Next Page
Loading...
