. . . . .
MAXPRO NVR MOBILE APP
Introduction
MAXPRO NVR 5.0 Installation and Configuration Guide 249
By default HIS Streaming is enabled in Settings screen as shown below.
Adding Multiple NVR Recorders
To add additional NVR on the mobile app:
Note: Maximum 20 NVR configurations are allowed.
1. Tap on the login screen. The list of already saved NVRs under My Recorders screen
is displayed.
2. Tap . The Add Recorder screen is displayed.
3. Add the MAXPRO NVR Recorder as follows:
•In the NVR Name field, type the name (For example Demo/Site name) for the
NVR.
•In the Local IP field, type the local IP address/Host name of the unit.
•In the Remote IP field, type the remote IP address/Host name of the unit.
• Type the Port number. The default port number is 443.
Apple mobile device Android mobile device
To Next Page
Loading...
