SECURING MAXPRO NVR
IPsec Policies for Secured Video Data Transmission
288 MAXPRO NVR 5.0 Installation and Configuration Guide
11
8. Select the Edit Properties check box if required and then click Finish.
Blocked Network Devices
User can configure Blocked connections for all the IP address and can allow only the ones
which are in Unrestricted (Permitted) devices lists to connect to the MAXPRO machine.
To configure blocked connections rule for all the IP address:
1. Click Add in Maxpro_IPSec_Allow_And_Block_Policy_Properties dialog box.
The Welcome wizard to create IP Security Rule appears.
To Next Page
Loading...
