Honeywell MAXPRO NVR Hybrid XE - Figure A-10 Define Unique ID Screen

. . . . .
APPENDIX A
Scheduled Metadata and Database Backup
MAXPRO NVR 5.0 Installation and Configuration Guide 323
Figure A-10 Define Unique ID screen
7. Click Run to execute the utility.
Or
Click Back togo back to home screen to change the settings.
Updating the Unique system ID for Specific Cameras
To update the Unique system ID for Specific Cameras
1. Perform step 1 through step 3 of Updating the Unique system ID for all Cameras section
on page 322.
2. Click Specific Camera(s) option, and then click Next. The next screen for the utility is
displayed and the New Unique ID column for all the cameras is displayed blank as
shown below.