Honeywell MAXPRO NVR Hybrid XE - Figure B-10 Loiter Trace Page; Figure B-9 Xtralis Login

APPENDIX B
Event and Alarm Types
340 MAXPRO NVR 5.0 Installation and Configuration Guide
B
Figure B-9 Xtralis Login
5. Enter the credentials and then click OK. The LoiterTrace page is displayed as shown
below.
Figure B-10 Loiter Trace Page
6. Under Configure > Calibrate tab:
a. Click Take Snapshot under Current front marker to take the snapshot and adjust
the viewer on the right pane as shown below.