. . . . .
LOGGING ON AND GETTING STARTED
Logging on Using Profiles
MAXPRO NVR 5.0 Installation and Configuration Guide 87
2. Click Server Settings. The Server Settings dialog box appears (Figure 5-2).
Figure 5-2 Server Settings dialog box
3. Click Add.
4. Type the Profile Name to identify the profile.
5. Type the Server IP/Name (numerical IP address or the network name of the MAXPRO
NVR server).
6. Click Save.
7. Click OK. The server address is saved in the profile.
Tip: You can click Set Default in the server settings dialog box to set the profile as the default
profile.
Setting the Default Profile
To set the default profile
1. Select the profile you want to set as default before logging on to the MAXPRO NVR.
2. In the User menu, , click Profiles > Set Default Profile. The profile is set as the
default profile. The default profile appears selected in the Profile box in the Log On
dialog box.
Figure 5-3 Setting the Default Profile
To Next Page
Loading...
