Honeywell Miller Revolution Harness - INSTALLING SHOULDER PADS; Optional Shoulder Pads Availability; Shoulder Pad Installation

8
INSTALLING SHOULDERS PADS
F. Optional Shoulder Pads
Optional harness shoulder pads are available.
Please contact your sales person or Miller customer service for more information.
G. Installing shoulder pads
G.1 Turn the harness, so that the D-ring is laying up on a at surface.
G.2 Take one of the shoulder pads and place your nger over the Velcro® .
G.3 Lift up the webbing shoulder strap and carefully slide the Velcro portion of the shoulder pad into the pocket.
G.4 Remove your nger and press the two Velcro strips together.
G.5 Finish by wrapping the other two sets of Velcro around the shoulder strap webbing.
G.1 G.2 G.3
G.4
G.5