Discover
Tap the Discover button to locate all discoverable Bluetooth devices in the vicinity. The Discovery process also queries for the
unique identifier of each device discovered.
Stop Button
Tap Stop at any time to end the Discover and Query for Unique Identifier functions. Devices not paired are not shown after any
reboot sequence.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX9 Bluetooth scanning range, the
Bluetooth connection between the paired device and the MX9 is lost. There may be audible or visual signals as paired
devices disconnect from the MX9.
4-58
To Next Page
Loading...
