Honeywell N4680 - Page 212

192 N4680 2D Decoded Scan Engine User Guide
Presentation LED Behavior After Decode *LEDs On TRGPCK1 37
LEDs Off TRGPCK0 37
Presentation Sensitivity Range 0-20 (*1) TRGPMS## 38
Presentation Centering Window Presentation Centering On PDCWIN1 38
*Presentation Centering Off PDCWIN0 38
Left of Presentation Centering Window
(*40%)
PDCLFT### 40
Right of Presentation Centering
Window (*60%)
PDCRGT### 40
Top of Presentation Centering Window
(*40%)
PDCTOP### 40
Bottom of Presentation Centering
Window (*60%)
PDCBOT### 40
CodeGate *CodeGate Off Out-of-Stand AOSCGD0. 40
CodeGate On Out-of-Stand AOSCGD1. 40
Mobile Phone Read Mode Hand Held Scanning - Mobile Phone PAPHHC 40
Streaming Presentation - Mobile Phone PAPSPC 40
Character Activation Mode *Off HSTCEN0 41
On HSTCEN1 41
Activation Character (Range 0-255) *12 [DC2] HSTACH### 41
End Character Activation After Good
Read
*Do Not End Character Activation After
Good Read
HSTCGD0 41
End Character Activation After Good
Read
HSTCGD1 42
Character Activation Timeout (Range 1 -
300,000)
*30,000 ms HSTCDT###### 41
Character Deactivation Mode *Off HSTDEN0 43
On HSTDEN1 43
Deactivation Character (Range 0-255) *14 [DC4] HSTDCH### 43
Poor Quality Codes Poor Quality 1D Reading On DECLDI1 43
*Poor Quality 1D Reading Off DECLDI0 43
Poor Quality PDF Reading On PDFXPR1 44
*Poor Quality PDF Reading Off PDFXPR0 44
Decoding Security Very High Reading Tolerance DECSEC0 44
High Reading Tolerance DECSEC1 44
*Medium Reading Tolerance DECSEC2 44
Low Reading Tolerance DECSEC3 44
Decode Time-Out 0-2500 ms DECTMX#### 45
Hands Free Time-Out Range 0 - 300,000 ms TRGPTO###### 45
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page