Honeywell N4680 - USB PC or Macintosh Keyboard

N4680 2D Decoded Scan Engine User Guide 9
Each bar code above also programs the following suffixes for each symbology:
USB PC or Macintosh Keyboard
Scan one of the following codes to program the scan engine for USB PC Keyboard
or USB Macintosh Keyboard. Scanning these codes also adds a CR suffix.
USB HID
Scan the following code to program the scan engine for USB HID.
USB Serial
Scan the following code to program the scan engine to emulate a regular RS232-
based COM Port. If you are using a Microsoft® Windows® PC, you will need to down-
load a driver from the Honeywell website (www.honeywellaidc.com). The driver will
use the next available COM Port number. Apple® Macintosh computers recognize
the scan engine as a USB CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
Symbology Suffix Symbology Suffix
EAN 8 0C Code 39 00 0A 0B
EAN 13 16 Interleaved 2 of 5 00 0D 0B
UPC A 0D Code 128 00 18 0B
UPC E 0A Code 39 00 0A 0B
U
S
B
K
e
y
b
o
a
r
d
(
P
C
)
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID
USB Serial