SFP-2402 & SFP-2404 Series Manual — P/N 51898:F3 8/6/2014 29
Installation of Optional Modules Installation
4XLM LED Interface Module (SFP-2404 only)
The 4XLM supports the RZA-4X Remote Annunciator module. The wiring of this module must
follow the requirements as specified in “Power-limited Wiring Requirements” on page 23.
Important: The 4XLM module can only
be installed on connectors J3 and J5 of the SFP-2404
main circuit board.
4XLB
Figure 2.15 4XLM LED Interface Module
Front View of RZA-4X
Side View
Single-gang Box
4XLM Module
Note: Make wiring connections with system
power off. Maximum wire impedance is
50 ohms per wiring connection.
+24 VDC
Out #1
Out #2
Out #3
Out #4
System Trouble
Sound
Resound
1
2
3
4
5
6
7
8
Connect to corresponding terminals of
RZA-4X Remote Annunciator
4xlma.wmf
rza-4xf.wmf
rza-4xbx.wmf
To Next Page
Loading...
