Honeywell oneWireless XYR 6000 - Brazil Anatel; Product Safety Agency Certifications; Canadian Standards Association (CSA); Factory Mutual (FM)

11. Agency Compliance
11.2. Product Safety Agency Certifications
30 OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
11.1.8 Brazil Anatel
• Conformity Certificate Number: NCC 7591/11
11.1.9 Republic of Korea - Korea Communications Commission
• KCC Certificate: HWL-XYR6000DS-SA14
11.2 Product Safety Agency Certifications
11.2.1 Canadian Standards Association (CSA)
• ANSI/ISA S82.02.01 (61010-1) CSA C22.2 No. 1010-1, ANSI/UL 61010-1, Safety Standard for
Electrical Equipment for Measurement, Control and Laboratory Use – Part 1: General Requirements
• C22.2 No. 0, General Requirements - Canadian Electrical Code, Part II
• C22.2 No. 25, Enclosures for Use in Class II, Group E, F & G Hazardous Locations
• C22.2 No. 94, Special Purpose Enclosures, Industrial Products
• C22.2 No. 14, Industrial Control Equipment, Industrial Products
• C22.2 No. 30, Explosion Proof Enclosures for Use in Hazardous Locations, Industrial Products
• C22.2 No. 157, Intrinsically Safe and Non-Incendive Equipment for Use in Hazardous Locations
• C22.2 No. 213, Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous
Locations
• E60079-0, Electrical Apparatus for Explosive Gas Atmospheres, Part 0: General Requirements
• E60079-1, Electrical Apparatus for Explosive Gas Atmospheres, Part 1: Flameproof “d”
• E60079-15, Electrical Apparatus for Explosive Gas Atmospheres, Part 15: Electrical Apparatus With
Type of Protection "n"
• Temperature code: T4 (135°C) based on the maximum specified ambient of 85°C.
11.2.2 Factory Mutual (FM)
• ANSI/ISA S82.02.01 (61010-1) CSA C22.2 No. 1010-1, ANSI/UL 61010-1, Safety Standard for
Electrical Equipment for Measurement, Control and Laboratory Use – Part 1: General Requirements
• FM electrical equipment requirements for use within Class I, Division 2, Groups A, B, C and D/Zone
2, Group IIC Hazardous Locations.
• Factory Mutual Approval Standard Class No. 3600, “Electrical Equipment for Use in Hazardous
(Classified) Locations – General Requirements
• Factory Mutual Approval Standard Class No. 3810, “Electrical and Electronic Test, Measuring, and
Process Control Equipment
• Factory Mutual Approval Standard Class No. 3611, “Electrical Equipment for Use in Class I,
Division 2, Class II, Division 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations
• Temperature code: T4 (135°C) based on the maximum specified ambient of 85°C.