www.honeywell.com/security
70 | Performance Series IR 1080p IP PTZ Camera User Guide
Account Setup
The system supports up to 15 characters for the user name or user group name. You can use
letters, numbers, and the underscore character (_) for the user or group name.
You can configure up to 18 users and eight groups (default factory settings). The factory default
setup includes two user levels: user and admin (case-sensitive).
When configuring groups, you can configure the rights of those groups. You can also set the
rights for individuals within groups.
Note User management adopts group/user modes. The user name and the group
name should be unique. A user can be included in only one group at a time.
User Name
In the Username Configuration interface, you can enable anonymous login, add/remove
users, and modify a username.
Figure 5-37 Username Configuration Interface
NTP Server Enter the NTP time server name/address.
Port Configure the port for the NTP time server.
Update Period
Configure the synchronization periods between the camera and the
time server.
Table 5-26 Date and Time Configurations (cont’d)
Parameter Function
To Next Page
Loading...
