Honeywell PRIMUS 1000 - Changing a Waypoint; Typical Plan Mode Presentation; Typical Plan Mode with Navaid Components and Flight Plan

PRIMUSr 1000 Integrated Avionics System
A28--1146--112--00
Electronic Flight Instrument System (EFIS)
4-80
TYPICAL PLAN MODE PRESENTATION
Figure 4--47 shows a typical plan mode display.
S
12
6
21
3
TAS
AD--50941--R1@
Typical Plan Mode With Navaid Components
and Flight Plan
Figure 4--47
CHANGING A WAYPOINT
Adding a waypoint is a routine operation on the MFD. Table 4--22
describes the procedure to change a waypoint. The procedure inserts
anewwaypointbetween DRK1andLL03.TheMAPdisplayisnormally
used to define a new waypoint.