Honeywell PRO TH4110B - EnergyStar Settings for Maximum Cost Savings

Inside Set To
75
6:30
AM
75
Wake
Cool
On
°
°
Replace Batt
Installation Guide
10
Quick reference to controls
Digital display screen Temperature adjustment
• Set: Press to set time/day/
schedule
• Hold: Press to override
programmed temperature control
• Run: Press to resume program
schedule
System switch
• Cool: Thermostat controls only
the cooling system.
• Heat: Thermostat controls only
the heating system.
• Off: Heating and cooling
systems are off.
Fan switch
On: Fan runs continuously.
Auto: Fan runs only when heating
or cooling system is on.
Built-in compressor protection (Setup Function 15)
This feature helps prevent damage to the
compressor in the air conditioning or heat
pump system.
Damage can occur if the compressor is re-
started too soon after shutdown.This feature
forces the compressor to wait for a few
minutes before restarting.
During the wait time, the message Cool On
(or Heat On if you have a heat pump) will
flash on the display.When the safe wait time
has elapsed, the message stops flashing and
the compressor turns on.
Quick reference to display screen
Current inside
temperature
Low battery warning Current day/time
Current program period
Wake/Leave/Return/Sleep
Temperature setting
System status
(Heat On, Cool On)
Inside Set To
75
6:30
AM
75
Cool
On
°
°
Message flashes until safe
restart time has elapsed
Wed
Wake
Wed