Operating Manual
14
Built-in compressor protection
This feature helps prevent damage to the
compressor in the air conditioning or heat
pump system.
Damage can occur if the compressor is re-
started too soon after shutdown.This feature
forces the compressor to wait for a few
minutes before restarting.
During the wait time, the message Cool On
(or Heat On if you have a heat pump) will
flash on the display.When the safe wait time
has elapsed, the message stops flashing and
the compressor turns on.
Inside Set To
75
6:30
AM
75
Cool
On
°
°
Message flashes until safe
restart time has elapsed
Wake
Wed
To Next Page
Loading...
