Honeywell RAEGuard 2 PID - Using The Magnet Key; System Initialization; Reading Display

RAEGuard 2 PID User’s Guide
20
7 Display And User Interface
7.1 User Interface
The RAEGuard 2 PID’s user interface consists of a status LED, an
LCD display, and three keys, [+], [MODE], and [-]. The three keys
are operated by using the Magnet Key.
RAEGuard 2 PID user interface.
7.2 Magnet Key
The RAEGuard 2 PID has no external switches, but instead uses the
magnetic end of the RAEGuard Magnet Key (p/n 033-3032-000) to
activate switches built into the unit.
Magnet
SIDE VIEW
TOP VIEW