RTHL2310/RTHL221
13 69-2577ES—01
About your new thermostat
Temporary
Wake
Set
am
70
6
:
30
M32708
Set
am
75
6
:
30
M32709
Program schedule override (temporary)
Press s or t to immediately adjust the
temperature. This will temporarily override
the temperature setting for the current
time period.
“Temporary” will appear on the display
and the current program period will flash.
The new temperature will be maintained
only until the next programmed time
period begins (see page 9).
To cancel the temporary setting at any
time, press RUN.
Press to temporarily adjust temperature.
Press to cancel temporary setting and
resume program schedule.
Note: Make sure the thermostat is set to the
system you want to control (heat or cool).
To Next Page
Loading...
Need help?
General
