RTHL2310/RTHL221
3 69-2711EF—03
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set the
time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation) ..............................See page 6
2. Select system setting: Preset to Off ..................................To change, see page 7
3. Select fan setting: Preset to Auto .....................................To change, see page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep ....................................To change, see pages 9-12
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 13-14).
To Next Page
Loading...
