Operating Manual
69-2583ES—01 10
About your new thermostat
MCR32595
Heat
Heat/Cool
Select
Inside
Setting
Cool
Fan
Auto
If the cool temperature is lowered to where it gets close to the heat setting, an arrow
next to heat will show the thermostat is lowering the heat setting down to maintain a
3-degree separation.
Auto Changeover
CAUTION: To avoid possible compressor damage, do not use Auto
Changeover if the outside temperature drops below 50ºF (10ºC).
Press Select Heat/Cool to set the heat or cool
temperature.
The triangle indicates the cool temperature is
increasing to maintain 3 degrees between heat
and cool settings.
To Next Page
Loading...
Need help?
General
