Honeywell Searchpoint Optima Plus - 2.7 Mounting Accessories

MAN0905_Issue 7_07/17 Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
16
2. Introduction
Flow Housing(2108B0282)Remote Gassing Cell ( 2 1 0 8 B 0 2 4 0 ) 
Inlet
Outlet
For use in sampling system applications.
Material:solventresistantanodised
aluminium, with stainless steel nozzles,
outside diameter 6 mm. Searchpoint
OptimaZisonlysuppliedwithaow
housing.
Enableshigh%v/vconcentrationgas
to be applied remotely for performing
bump tests. Useful for units installed in
ducts or inaccessible areas. Required for
0–100%v/vmethanerange(sampling
system only). Searchpoint Optima X has
a special version of the RGC.
The RGC is a factory tted option.
2.7 Mounting Accessories
Junction Box Adaptor Plate (04200-A-1040)
The Junction Box Adaptor Plate enables low
gland clearance junction boxes to be used without
the Searchpoint Optima Plus fouling on the wall
/mountingsurface,forexampletheHoneywell
AnalyticsJunctionBox(00780-A-0100).Italso
has mounting points for the DVC100 and DVC100
MK2terminationunits.