Honeywell Searchpoint Optima Plus - 23.3 Device-Specific Commands

MAN0905_Issue 7_07/17 Searchpoint Optima Plus with optional HART
®
output
Operating Instructions
2108M0550
96
23.3 Device-Specic Commands
Thefollowingdevice-speciccommandsareimplemented:
Command Number Description
128 Read Gas Table Name
129 Read available Gas Table Name
130 Write Gas Table Index
132 Read Event Log history
133 Read Diagnostics (Warnings or faults)
135 Simulate Alarm or Warning or Fault
138 Write Alarm1 threshold
139 Read Alarm1 threshold
140 User Authentication
142 Password change
143 Enter/Exit Inhibit mode
146 Bump Test
147 Read Field Data
149 Read Real Time Clock
150 Write Real Time Clock
151 Read HART communication status during device fault
152 Write HART communication status during device fault
153 Read Inhibit current
154 Write Inhibit current
155 Read Warning current
156 Write Warning current
157 Read Over range current
158 Write Over range current
159 Clear latched faults and logged faults (partial or full)
160 Read Current operating mode
23. Appendix 5 –
HART
®
Commands Used