Honeywell SLC - 9.3 Wiring Detector Bases

60 FireLite SLC Wiring Manual — P/N 51309:P4 9/17/2014
Intelligent Detector Bases and Wireless Gateway Wiring a Detector Base
9.3 Wiring a Detector Base
Typical wiring of a detector base (B501 shown) connected to an SLC is shown in the figure below.
An optional RA100Z/RA400Z Remote LED Annunciator is shown connected to the detector.
+ –
+ –
–
+
SLC-B5012wire.wmf
RA100Z /
RA400Z
Remote LED
Annunciator
(Optional)
To Next Device
on SLC
From Control Panel SLC
Figure 9.1 Wiring a B210LP or B501 Detector Base
NOTE: The B210LP base wiring is identical to the B501. B501 is the flangeless model.