Honeywell SMX-AUS - Test Events; View Fire-Detected Zones; View Fire ALARMS

User’s Guide SMX-AUS
NS-MN-0032 / 11.2020 21
5.5.7 Test Events
To access the test events, tap
TST. The ZONES tab displays the zones that are under test
mode.
The ZONES tab contains the following details:
•
Zone number
•
Number of input devices in the zone
•
Zone description
•
Mode of test (whether with or without sounders)
Fig. 13: Test Events
The FIRE ALARMS tab displays the devices that are under test mode. The FIRE ALARMS tab
contains the following details
:
•
Device Type
•
Device Description
•
Zone number
•
Zone description
•
Loop number
•
Device Address
Fig. 14: Test FIRE ALARMS