SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
5-3
Multifunction Display (MFD) System
MFD CONTROLLER
The MFD controller, shown in Figure 5--2, is used to select MFD modes
and format.
AD--43040@
MFD Controller
Figure 5--2
The following paragraphs describe the MFD controller buttons,
switches, and joystick.
Navigation
D MAP/PLAN Button -- Pushing the MAP/PLAN button toggles
between displaying the heading up MAP mode and the north up
PLAN mode. When TCAS is installed, the button sequences
through PLAN (power--up), MAP, and TCAS.
D SRC (Source) Button -- Pushing the SRC button toggles between
the FMS1 and FMS2 as the source of long--range navigation data
for mapping. When TCAS is installed and displayed, SRC toggles
the MFD TCAS display between the right and left side TCAS display
features.
D WX (Weather) Button -- The WX button is used to call up weather
radar returns on the MFD MAP display (first push) or weather radar
only display (second push). When weather is displayed, the MAP
range is controlled by the weather radar controller.
NOTE: When dual weather radar controllers are installed,
repeatedly pushing the WX button cycles through the
different weather displays (WX with MAP or WX only) for
the display settings on both the pilot and copilot weather
radar controllers.
To Next Page
Loading...
