SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
5-5
Multifunction Display (MFD) System
Designator Control
D SKP (Skip) Button -- When this button is pushed, the designator
skips to the next displayed waypoint. If the button is pushed when
the designator is at the last displayed waypoint, the designator
returns to present position.
In the PLAN mode, the SKP button is used to sequence through all
the waypoints of the active flight plan.
D RCL (Recall) Button -- When the designator is not at its home
position (home is the aircraft symbol in MAP mode and the TO
waypoint in PLAN mode), pushing the RCL button moves the
designator to the home position. If the RCL button is pushed when
the designator is at its home position, the designator moves to
present position (aircraft symbol in PLAN mode).
D ENT (Enter) Button -- When the designator is offset from its home
position, pushing the ENT button transmits the designator LAT/LON
to the selected long range navigation as a requested waypoint.
D Joystick -- The joystick is used as a four--direction designator
control, (up, down, left, and right). The course and distance to the
designator from its home position is displayed in the upper left
corner of the display.
Checklist
D NORM (Normal) Button -- When the NORM button is pushed, the
the MFD’s normal checklist index is displayed. The normal checklist
index is arranged in the order of standard flight operations. Pushing
the NORM button displays the normal checklist index page that
contains the lowest order incomplete and unskipped checklist with
that checklist selected.
D EMER (Emergency) Button -- When the EMER button is pushed,
the MFD’s emergency checklist index is displayed. Abnormal
procedures can also be accessed. Abnormal and emergency
procedures can be arranged in a menu that is organized according
to aircraft systems.
To Next Page
Loading...
