Honeywell SPZ-8000 - TCAS Mode Traffic Display (Optional); 14 TCAS Traffic Display on MFD

SPZ--8000 Digital Integrated Flight Control System
A28--1146--055
REV 2
Multifunction Display (MFD) System
5-18
TCAS Mode Traffic Display (Optional)
The TCAS display, shown in Figure 5--14, is displayed on the MFD in
one of two ways:
D Pilot selected with the MAP/PLAN button on the MFD controller
D Automatically displayed when the TCAS is in AUTO and detects a
TA or RA traffic condition.
NOTES: 1. Automatic display of TCAS on the MFD is shown at the
last selected TCAS range; however, the first selection
of TCAS on the MFD after power--up is with the 6 NM
range displayed.
2. MFD TCAS auto display does not override a checklist
display.
TCAS Traffic Display on MFD
Figure 5--14