EasyManua.ls Logo

Honeywell SPZ-8000 - Page 479

Honeywell SPZ-8000
681 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. G. (8) (g) Left High Pressure (L HP) Tach Display - The L HP scale is the
second scale in the (fourth) row of analog scales. This
display is a low end expansion of the HP round dial gauge on
the primary engine instruments. The white scale is marked
every 10% RPM and ranges between O and 60% RPM. A set-point
triangular mark is shown at 15%RPM. A white label L HP
appears at the scale bottom.
The white data display pointer is
a moving ladder type thermometer.
As the HP value increases,
the thermometer grows up the scale. A ladder rung is left at
each labeled tickmark.
(h) Right High Pressure (R HP) Tach Display - The L HP scale is the
fourth scale in the (fourth) row of analog scales. This
display is a low end expansion of the HP round dial gauge on
the primary engine instruments. The white scale is marked
every 10% RPM and ranges between O and 60% RPM. A set-point
triangular mark is shown at 15% RPM. A white label R HP
appears at the scale bottom. The white data display pointer is
a moving ladder type thermometer. As the HP value increases,
the thermometer grows up the scale. A ladder rung is left at
each labeled tickmark.
(i) Left Engine Oil Pressure (L OIL PRESS) Display - The L OIL
PRESS digital readout is located in the first box of the fifth
row of the ENGINE START format.
The normally white digits are
readable to a 1 PSI resolution.
The display digits change
color as a function of oil pressure as defined below:
RED O PSI <OIL PRESS< 16 PSI
AMBER 10 PSI gOIL PRESS < 30 PSI
WHITE 30 PSI sOIL PRESS
(j) Single Rudder Limit (SING RUD LIMIT) Annunciation - The amber
SING RUD LIMIT annunciation appears in the center box of the
fifth row whenever this condition is active.
(k) Right Engine Oil Pressure (ROIL PRESS) Display - The ROIL
PRESS digital readout is located in the third box of the fifth
row of the ENGINE START format.
The normally white digits are
readable to a 1 PSI resolution.
The display digits change
color as a function of oil pressure as defined below:
RED O PSI sOIL PRESS< 16 PSI
AMBER 10 PSI <OIL PRESS < 30 PSI
WHITE 30 PSI <OIL PRESS
22-14-00
Page 2~8~8
Aug 15/91
Use or disclosure of information on this page is subject to the restrictions on the title page of this document.

Table of Contents

Other manuals for Honeywell SPZ-8000

Related product manuals