Revision 4.0 ST 700 Series HART/DE Option User’s Manual Page 15
5.3.2 Device Information Configuration
In this and subsequent procedures, the notations R for read only and R/W for read/write are used to
indicate if a parameter can be edited.
1. On the DE MAIN MENU, click Device Info. The DEVICE INFO box will be displayed.
2. Configure device information according to Table 5.
Table 5 – Device Information Parameters
Read (R) or
Read/Write (R/W)
User ID up to 8 alphanumeric characters.
Manufacturer’s device type identifier
Manufacturer’s firmware version identifier
Up to 32 alphanumeric characters
3. Click the Back button to return to the DE MAIN MENU.
To Next Page
Loading...
