Honeywell ST 700 - Using FDC for various device operations

Page 20 ST 700 Series HART/DE Option User’s Manual Revision 4.0
Table 8 – Local Display Configuration Parameters
Parameter
Read (R) or
Read/Write
(R/W)
Configuration Details
Display Hardware
R
Type of Transmitter Display:
 Full Functional Display
 No Display installed
Display Units
R/W
Engineering Units for this Display:
%, inH2O@39
o
F mmHg@0
o
C
psi, KPa MPa, mBar,
Bar g/cm2, kg/cm2 mmH2O@4
o
C
mHg@0
o
C mH2O@4
o
C GPM
GPH Custom
Custom Units Tag
R/W
8 Characters
Note that the Custom Units Tag is not sent to the
Display. It will be displayed in the Tool.
Flow EU Upper Value
R/W
Floating point (for square root configurations)
Flow EU Lower Value
R/W
Floating point (for square root configurations)
Click the Back button to return to the DE MAIN MENU.