Honeywell ST 700 - Saving the Configuration to File

Page 22 ST 700 Series HART/DE Option User’s Manual Revision 4.0
5.3.7 Saving the Configuration to File
1. Display the DE MAIN MENU, and click the Save to File button. The File Dialog will be
displayed.
2. Save the configuration as follows:
a. Click Cancel to return to the DE MAIN MENU, and abort saving the configuration.
b. Click Yes to add the configuration to the current working file, and return the display
to the DE MAIN MENU.
c. Click No to save to a different file; the Save As screen will be displayed.
d. The default location and folder are set to SD Card and CFG_MCT. However, you
can enter a new name for the file; the default name is New1.
e. After entering the file name, click the Save button to display the DE MAIN MENU.