Page 30 ST 700 Series HART/DE Option User’s Manual Revision 4.0
6.2.4 Offline configuration
Offline configuration refers to configuring a device offline (without physically connecting to the
device) using a template and then downloading the configuration to the device. Presently, FDC
application software does not support creating offline configuration. However, it supports importing
of offline configuration from FDM (R310 and above).
6.2.5 Online Configuration Overview
Online Configuration option provides you a set of functions with which you can perform various
operations on a device with an active communication link. These operations primarily include
configuration, calibration, monitoring, and diagnostics of a HART device. Typically, these operations
could be realized through various constructs exposed by the DD file of the device. In addition, FDC
also provides some additional application functions for you to perform these functions more
conveniently.
Online configuration includes a set of functions to perform various operations on a Transmitter with
active communication link. These operations primarily include:
Identifying a Transmitter
Reading and reviewing Transmitter variable values
Editing Transmitter variable values
Downloading the selected/edited variable set to the Transmitter
6.2.5.1 Detecting and loading a device
Tap the Online Configuration button on the Application Homepage.
The device detection and loading process automatically gets started. Depending upon the Device
Detection and DD Selection settings you may have chosen, you may be prompted for certain inputs as
described in the Settings section.
To Next Page
Loading...
