8 Device connectors
All the connections are on the back of the reader inside the round area.
Figure 1 Connectors layout
Connector Function Specification
J1 Ethernet interface RJ45 Female Connector
P4 Output interface 5Pin,--3.5MM pitch, Header connector
P5 TAMPER Switch interface 2Pin,--2.5MM Pitch, Header connector
P6 RS-485 communication
interface
3Pin,--2.5MM Pitch, Header connector
P7 Inputs and DC power
interface
6Pin,--3.5MM Pitch, Header connector
SW1 RS-485 length settings 2Pin,--1.27MM DIP switches
Connector Function Specification
8
49
To Next Page
Loading...
