VISIONPRO
®
8000 WITH REDLINK™
97 68-0312—03
You can change or create custom reminders in ISU 1200.
Fig. 248.
For example, to set up a Fall Service Reminder based on
Outdoor Temperature:
1. Touch Press HERE to edit (see Fig. 248).
2. Select Fall Reminder and press Next.
Fig. 249.
3. Press up or down arrows until “Based on Out. Temp” is
displayed, then press Next.
Fig. 250.
4. Press the up or down arrows to set the outdoor tempera-
ture and press Next.
Fig. 251.
NOTE: A seasonal maintenance reminder will appear
when the outdoor temperature reaches the level
you select, after a specified date.
5. Press the up or down arrows to set the date to begin
monitoring outdoor temperature. The thermostat will not
display a reminder unless the temperature you set is
reached after the date you set at this screen.
Fig. 252.
6. The preview of the Fall Service Reminder shows you
what you’ve selected. Press Done when finished.
Fig. 253.
To Next Page
Loading...
