TH8320ZW1000
7
69-2485EFS—01
ENGLISH
SCHED HOLD CLOCK SCREEN
WED
AM
SYSTEM
HEAT
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
M32529
Press FAN to select fan operation, then
press DONE.
• On: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is on.
• Circ: Fan runs randomly, about 35% of
the time, not counting any run time with
the heating or cooling system.
You can press FAN to override the fan set-
tings you’ve programmed for different time
periods. If you select On or Circ, the setting
you select will remain active until you press
FAN again to select Auto (see page 19 for
more information).
Press FAN
Fan setting
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.
To Next Page
Loading...
