Stop Button
Tap Stop at any time to end the Discover and Query for Unique Identifier functions. Devices not paired are not shown after any
reboot sequence.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the Thor VM1 Bluetooth
scanning range, the Bluetooth connection between the paired device and the Thor VM1 is lost. There
may be audible or visual signals as paired devices disconnect from the Thor VM1.
Bluetooth Device List
The discovered paired devices may or may not be identified with an icon. Discovered devices without an icon can be paired as
a Scanner or a Printer. The Bluetooth panel assigns an icon to the device name.
An icon with a red background indicates the device's Bluetooth connection is inactive.
3-56
To Next Page
Loading...
Need help?
General
