Honeywell Thor VM1 Reference Guide

Screen Control
Start > Settings > Control Panel > Screen Control
Set screen properties for the Thor VM1.
Factory Default Settings
Screen Blanking (Blackout)
Enable screen blanking Disabled
Screen on delay (ms) 100
COM Port COM1
Current Level
LCD Brightness (%) 100 (see note)
Ambient Light (%) (see note)
Automatic Brightness Control
Enable automatic brightness control Disabled
Low to medium light level (%) 25%
Medium to high light level (%) 75%
Note: If Automatic Brightness Control is enabled for an outdoor display, the value for LCD Brightness
depends on the Ambient Light %.
Note: There is no default value for Ambient Light % as it varies depending on the level of light where the
Thor VM1 is located.
3-147

Honeywell Thor VM1 Specifications

General

Brand	Honeywell
Model	Thor VM1
Category	Automobile Accessories
Language	English