Honeywell TL9160AR - Mounting the Outdoor Sensor; Outdoor Sensor Placement; Error Codes; Troubleshooting Error Messages

21 69-2474EFS—01
EConnect™ Wireless Thermostat Kit TL9160AR
Display Description
LO
Theindoortemperatureisbelow32°F(0°C).
HI
Theindoortemperatureisabove140°F(60°C).
- -
Thetemperaturereadingiscurrentlyunavailableorthesensorisdefective.
E128
Thewirelessnetworksetupmustberedone.
E129
Attemptingtoconnectincompatiblewirelessdevices.
E130
Invalidaddress.Callcustomerassistance.
E134
Lowsignalstrength.Movewirelessdevicetoadifferentlocationandtryagain.
E137
Maximumnumberofdevicesisexceeded.
E138
MakesureConnectedlightonEIMisashingandyouare2+feetawayfromEIM.
E152
Incorrectorder.MakesuretolinkEIMtoproperthermostat.
Error codes
Mounting the outdoor sensor (optional)
Mountthesensorverticallyonan
exteriorwall,atleast6inchesbelow
anyoverhang.Choosealocation
protectedfromdirectsunlight.
Placesensorsecurelyinbracket,
facingawayfromwall.