Honeywell TrueSTEAM HM512 - Page 8

HoneywellInternationalInc.
1985DouglasDriveNorth
GoldenValley,MN55422
http://yourhome.honeywell.com
Automation and Control Solutions
® U.S. Registered Trademark.
©2008HoneywellInternationalInc.
69-2276EFS—01M.S.09-08
HoneywellLimited-HoneywellLimitée
35DynamicDrive
Toronto, Ontario M1V 4Z9
PrintedinU.S.A.onrecycled
paper containing at least 10%
post-consumerpaperfibers.
Remote mount installation
To install clamps onto the insulated steam hose:
 Cutaslitintheinsulationhalfwayaroundthehouse.Donotcutintothesteamhose.
Insert the hose clamp into the slit and hook it onto the hose.
IMPORTANT:
Runhosecontinuouslyuphill.Forhorizontalruns,ensureaslopeof2in.
uphillperfoot.Securehoseeveryhorizontalfootusingclamps(provided).
Forlonghorizontalruns,supportthehosebyfirstsecuringalengthof2x
4lumber,U-channel,orangleironwiththeappropriateslope.Thenattach
the hose to the top of this support. If remote hose requires downward pitch,
refer to page 4 for instruction.
M24771
Attachremotehosebyslidingoverthenozzle
and adapter. Secure both hose ends with
clamps (provided).
9
A
B
A
B
69-2276EFS_A.indd 8 9/25/2008 9:26:55 AM