Honeywell VisionPRO TH8000 Series - Page 13

VisionPRO® TH8DDD Series
Press SCHED
1. Press SCHED, then EDIT.
2. Press day buttons (MON-SUN) to select
day(s).
3. Press
... or ". to set Wake time for selected
Press EDIT
day(s).
4. Press
... or ". to set Heat and Cool
temperature
for this time period.
Select day(s)
Set heat/cool levels
5. Press other time periods (LEAVE, RETURN,
SLEEP) to set time and temperatures for
each.
6. Press DONE to save & exit (or press CANCEL
to exit without saving changes).
Note: You can press CANCEL PERIOD to eliminate any
unwanted time period.
Note: Press FAN to customize fan settings for any
time period (see page
7).
11
Set time
for program
period
to start