Honeywell VOYAGER 1202G BF - Page 189

11 - 17
Codabar Concatenation *Off CBRCCT0 8-3
On CBRCCT1 8-3
Require CBRCCT2 8-3
Concatenation Timeout DLYCCT 8-4
Codabar Redundancy Range (0 - 10) *0 CBRVOT## 8-4
Codabar Message Length Minimum (1 - 80) *3 CBRMIN## 8-4
Maximum (1 - 80) *80 CBRMAX## 8-4
Code 39 Default All Code 39
Settings
C39DFT 8-5
Off C39ENA0 8-5
*On C39ENA1 8-5
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 8-5
Transmit C39SSX1 8-5
Code 39 Check Char. *No Check Char. C39CK20 8-5
Validate, But Don’t
Transmit
C39CK21 8-5
Validate,
and Transmit
C39CK22 8-5
Code 39 Redundancy Range (0 - 10) *0 C39VOT## 8-6
Code 39 Message Length Minimum (1 - 80) *3 C39MIN## 8-6
Maximum (1 - 80) *80 C39MAX## 8-6
Code 32 Pharmaceutical (PARAF) *Off C39B320 8-6
On C39B321 8-6
Code 39 Full ASCII *Off C39ASC0 8-7
On C39ASC1 8-7
Interleaved 2 of 5 Default All Interleaved
2 of 5 Settings
I25DFT 8-8
Off I25ENA0 8-8
*On I25ENA1 8-8
NULL Characters *Off I25NUL0 8-8
On I25NUL1 8-8
Interleaved 2 of 5 Check Digit *No Check Char. I25CK20 8-8
Validate, But Don’t
Transmit
I25CK21 8-8
Validate, and Transmit I25CK22 8-9
Interleaved 2 of 5 Redundancy Range (0 - 10) *0 I25VOT## 8-9
Interleaved 2 of 5 Message Length Minimum (1 - 80) *6 I25MIN## 8-9
Maximum (1 - 80) *80 I25MAX## 8-9
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 8-9
*Off N25ENA0 8-9
On N25ENA1 8-9
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page