Honeywell VOYAGER 1202G BF - Page 191

11 - 19
Code 11 Check Digits Required 1 Check Digit Required C11CK20 8-15
*2 Check Digits Required C11CK21 8-15
Auto Select Check Digits Required C11CK22 8-15
Check Digit Validation Validate and Transmit One Check Digit C11CK23 8-16
Validate and Transmit Two Check Digits C11CK24 8-16
Validate and Transmit Auto Select Check
Digits
C11CK25 8-16
Code 11 Redundancy Range (0 - 10) *0 C11VOT## 8-16
Code 11 Message Length Minimum (1 - 80) *3 C11MIN## 8-16
Maximum (1 - 80) *80 C11MAX## 8-16
Code 128 Default All Code 128
Settings
128DFT 8-17
Off 128ENA0 8-17
*On 128ENA1 8-17
128 Group Separator Output *Off 128GSE0 8-17
On 128GSE1 8-17
Code 128 Redundancy Range (0 - 10) *0 128VOT## 8-17
Code 128 Message Length Minimum (1 - 80) *3 128MIN## 8-18
Maximum (1 - 80) *80 128MAX## 8-18
ISBT 128 *Off ISBENA0 8-18
On ISBENA1 8-18
Concatenation Timeout DLYCCT 8-18
ISBT128 Predefined Concatenation
Sequences
* Donation ID Number (001)
and ABO/RhD Blood Groups (002)
ISBPCS0 8-19
Donation ID Number (001) and
Donor ID Number (019)
ISBPCS1 8-19
Donation ID Number (001) and
Confidential Unit Exclusion Status
ISBPCS2 8-19
Product Code (003) and Expiration Date
(Form 1)
ISBPCS3 8-19
Product Code (003) and Expiration Date
(Form 2)
ISBPCS4 8-19
Product Code (003) and Expiration Date
(Form 3)
ISBPCS5 8-19
Product Code (003) and Expiration Date
(Form 4)
ISBPCS6 8-19
ISBT 128 Predefined Concatenation
Sequences On/Off
*Off ISBPCE0 8-20
Allow Predefined Sequence ISBPCE1 8-20
Require Predefined Sequence ISBPCE2 8-20
ISBT 128 User-Defined Concatenation
Sequences
1st Left Identifier (0-255) *0 ISBUL1## 8-20
2nd Left Identifier (0-255) *0 ISBUL2## 8-21
1st Right Identifier (0-255) *0 ISBUR1## 8-21
2nd Right Identifier (0-255) *0 ISBUR2## 8-21
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page