Honeywell Voyager 1450g2DHR Series - RS232 Modifiers; RS232 Baud Rate

2 - 19
Automatic Direct Connect Mode: This selection can be used if you have an IBM AT style terminal and the system is dropping
characters. Default = Off.
RS232 Modifiers
RS232 Baud Rate
Baud Rate sends the data from the scanner to the terminal at the specified rate. The host terminal must be set for the
same baud rate as the scanner. Default = 9600.
Automatic Direct Connect Mode
On
* Automatic Direct Connect
Mode Off
300
600
1200
2400
4800
* 9600
19200