134 Vuquest 3320g User Guide
QR Code
< Default All QR Code Settings >
QR Code On/Off
This selection applies to both QR Code and Micro QR Code.
QR Code Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description on page 94 for additional information. Minimum and Maximum
lengths = 1-7089. Minimum Default = 1, Maximum Default = 7089.
QR Code Append
This function allows the scanner to append the data from several QR Code
barcodes together before transmitting them to the host computer. When the
scanner encounters an QR Code barcode with the append trigger character(s), it
buffers the number of QR Code barcodes determined by information encoded in
those barcodes. Once the proper number of codes is reached, the data is output in
the order specified in the barcodes. Default = On.
To Next Page
Loading...
