Honeywell XLS140

To Previous Page

Automation and Control Solutions

Honeywell International Inc. Honeywell Limited-Honeywell Limitée

1985 Douglas Drive North 35 Dynamic Drive

Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9

customer.honeywell.com

® U.S. Registered Trademark

95-7673-3 C. Rev. 12-05

Main Page

Table of Contents5
Section 1: about this Manual9
Standards and Other Documents9
Supplemental Documentation10
Cautions and Warnings11
Section 2: System Overview13
System Description13
1: Standard Features13
2: Options13
3: System Limitations14
System Components14
1: Basic Equipment Required14
2: Control Panel Circuit Board15
3: Main Power Supply15
4: Circuit Board Components16
System Cabinets18
Optional Devices19
Intelligent Detectors20
Addressable Modules22
Annunciation Modules23
Annunciators23
1: Annunciators with 24- and 48-Point Capacity24
2: Annunciator Fixed Modules24
Peripheral Displays and Printers24
Panel Circuit Modules25
Voice Alarm System26
Section 3: Installation29
Preparing for Installation29
1: Standards and Codes29
Installation Checklist30
Mounting a Cabinet30
Laying out Equipment in Cabinet and Chassis31
Installing the Control Panel33
1: Control Panel Circuit Board & Keypad/Display Unit33
2: Using XLS-NCA as Primary Display35
3: Loop Expander Module36
4: Network Control Module37
5: Panel Circuit Modules and Other Option Boards37
Connecting the Power Cables39
1: Overview39
2: Connecting the Control Panel to AC Power39
3: Checking AC Power40
4: Installing and Connecting the Batteries40
5: APS-6R Auxiliary Power Supply Connections41
6: External DC Power Output Connections41
NAC Connections & Releasing Circuits42
Output Relay Connections42
Backup-Alarm Switches43
Installing a Transmitter Module TM-443
UL Power-Limited Wiring Requirements43
1: Labeling Modules and Circuits44
Installing Panel Circuit Modules44
1: Overview44
2: Mounting Expander Boards45
3: Connecting Ribbon Cables for a CAB-4 Series Backbox45
4: Installing the Panel Circuit Modules46
5: Connecting ICM-4RK and ICE-4 Modules46
Power Supply Connections47
Multiple Power Supplies47
6: Field-Wiring the ICM-4RK and ICE-4 (NFPA Style y or Z)48
7: Connecting CRM-4RK/CRE-4 Modules49
Auxiliary Relay Module (ARM-4): Product-Specific Details49
1: Overview49
2: Installation49
3: Field Wiring an Auxiliary Relay Module50
Installing Remote Printers And/Or CRT51
1: Custom Cable Fabrication51
2: Installing and Configuring the PRN Series Printer51
Connecting a Remote PRN Series Printer51
Setting Printer Options52
3: Installing and Configuring a Keltron Printer52
Setting up the Keltron Printer53
4: Installing and Configuring a CRT-253
Setting CRT-2 Parameters54
5: Connecting a PC55
6: Connecting Multiple Printers, Crts, or CRT/PRN Combination55
Wiring a Signaling Line Circuit (SLC)56
Section 4: Applications59
Overview59
Municipal Box (Auxiliary)59
NFPA 72-1999 Central or Remote Station Fire Alarm System (Protected Premises Unit)60
NFPA 72-1999 Proprietary Fire Alarm Systems61
Fire/Security Applications61
1: General Operation61
2: Installing a Security Tamper Switch62
3: Receiving Unit62
4: Programming63
5: Wiring for Proprietary Security Alarm Applications63
Releasing Applications64
1: Overview64
2: Programming64
3: Wiring64
4: Connecting a Releasing Device to the Control Panel65
5: Connecting a Releasing Device to the XLS-CM-N/TC810N1013 Module66
6: Connecting an NBG-12LRA Agent Release-Abort Station67
Section 5: Testing the System69
Acceptance Test69
Periodic Testing and Service69
Operational Checks69
Battery Checks and Maintenance70
On-Board Memory-Backup Battery70
Appendix A: Power Supply Calculations71
A.1: Calculating AC Branch Circuit Current71
AC Branch Circuit Installation71
A.2: Calculating the System Current Draws71
How to Use the Calculating Tables71
A.2.1: Calculating the Maximum Secondary Power Fire Alarm Current Draw74
A.3: Calculating the Battery Requirements75
A.3.1: Calculating the Battery Capacity75
A.3.2: Calculating the Battery Size76
Appendix B: Electrical Specifications77
B.1: Electrical Specifications77
AC Power77
Batteries77
Signaling Line Circuit (SLC)78
Notification Appliance Circuits & Releasing Circuits78
Output Relays78
Four-Wire Smoke Detector Power78
Power Output78
Operating Power: AC Branch Circuit79
Operating Power: Secondary Power Source (Batteries)79
B.2: Wire Requirements79
Appendix C: Compatible Equipment81
Honeywell and Notifier Equipment81
System Sensor Equipment82
Appendix D: Canadian Applications83
D.1: Standalone Application83
D.1.1: XLS140 with KDM-283
D.1.2: XLS140 with XLS-NCA83
D.2: Local Network Application83
D.3: Automatic Alarm Signal Silence83
D.4: Annunciator Applications83
D.5: Releasing Devices83
Index84

Honeywell XLS140 - Page 88

Table of Contents

Related product manuals