Standard Product Defaults
The following barcode resets all standard product default settings.
Standard Product Defaults
USB Serial
If you are using a Microsoft® Windows® PC, you must download a driver from the Honeywell website. The driver
will use the next available COM Port number. Scan the following code to program the scanner to emulate a regular
RS232-based COM Port. Apple® Macintosh computers recognize the scanner as a USB CDC class device and
automatically use a class driver.
USB Serial
Note: No extra configuration (e.g., baud rate) is necessary.
USB PC Keyboard Scan the following code to program the scanner for a USB PC Keyboard.
USB PC Keyboard
Keyboard Country
Scan the appropriate country code below to program the keyboard layout for your country or language. By default,
national replacements are used for the following characters: #$@[\]^`{|}~. Refer to the ISO 646 Character
Replacements chart in your User Guide to view the character replacements for each
country.
USA (Default)
Denmark
France
To Next Page
Loading...
