Function Code Transmit
When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the
function code to the terminal. Charts of these function codes are provided in your User Guide. When the scanner is in
keyboard wedge mode, the scan code is converted to a key code before it
is transmitted.
Enable (Default)
Disable
Support
To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.
User Documentation
For the user guide and other documentation, go to www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty
Patents
For patent information, see www.hsmpats.com.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information
contained in this document without prior notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does not represent a commitment on the part
of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all
responsibility for the selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated into another language without the prior written consent of
HII. Copyright 2020 Honeywell International Inc. All rights reserved.
File Downloads
Instruction Manual
Cordless Industrial Area-Imaging Scanner, XP 1991i
Download [optimized]
Download
References
To Next Page
Loading...
